Bristol Office Cleaning Tips For Maintaining Floor Cleaning Equipment

For Bristol office cleaning teams, the care and maintenance of floor cleaning equipment is integral to success. After all, the presence of a gleaming clean floor is one of the most visible signs that a cleaning service is doing high-quality work. When floor cleaning equipment isn’t able to perform its job properly, the sub-par finish produced reflects very poorly on the cleaning service using it. Read on for Bristol office cleaning tips for floors and much more.

bristol office cleaning tips

Bristol Office Cleaning Tips : Essential Floor Cleaning Equipment Maintenance Steps

To keep floor cleaning equipment in peak working order, Bristol office cleaning teams should be sure to perform the following five maintenance tasks regularly:

1. Empty and rinse the recovery tanks. Rinsing the dirty water out of the recovery tanks will help to prevent odours and the buildup of scum within the tank. For the same reasons, you should remove and clean the shut-off filters. Make sure to remove the tanks’ lids for a sufficient period of time to allow them to completely air-dry after you have cleaned them.

2. Empty the solution tanks frequently. When solution is left in a tank for a long period of time, it begins to clog the filters. This greatly affects the performance of the machine, resulting in an inferior clean.

3. Clean all brushes and pads after each use. A soiled brush or pad cannot produce a ‘true’ clean. You should also check your brushes and pads regularly for signs of wear. A cleaning pad or brush that is significantly worn will be unable to pick up dirt effectively, so they must be replaced promptly when they start to age.

4. All vacuum ports and squeegees should be cleaned after each use. According to Paul Lewandowski, Equipment Product Manager at Betco Chemical Corporation, these features should always be cleaned before the dirt on them has a chance to dry. ‘Dirt and soil always collect in these areas and a neglected squeegee will very quickly cause problems with the ability of the machine to leave a clean and dry floor,’ advises Lewandowski.

5. Maintain the jets regularly. If the jets on your floor cleaning equipment become clogged with dirt, they will fail to spray evenly. Most Bristol office cleaning experts recommend that you soak your floor cleaning machine’s jets in a mixture of vinegar and water overnight; this both cleans the jets and prevents the buildup of mineral deposits.

While keeping floor cleaning equipment in peak condition may present an extra expense (in the form of both time and money), the results are well worth it. Remember, competition within the cleaning business is tough; to secure repeat business, you’ll need to combine peerless customer service with a flawless clean, every time. Likewise, cleaning equipment that is properly cleaned and maintained lasts longer. After all, the harder a machine has to work during operation (due to clogged filters and other issues), the more strain is placed on its internal components. Keeping your equipment in peak condition will therefore actually save you money over the long term as you will not have to replace your machines as frequently. We hope you enjoyed these Bristol office cleaning tips.

Leave a Comment

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.